Filter
Top Products
Using your refrigerator
Air Control
Temperature Control
Air Outlet
Power Saving Control
Setting the controls.. .
The Temperature Control is in the refrigerator and
the Air Control is in the freezer section. When the
refrigerator is plugged in for the first time...
‘@’ ,$@
3
I, Set the TEMPERA-
2. Set the AIR CON-
TURE CONTROL to 3.
TROL to 3.
Give the refrigerator time to cool down com-
pletely before adding food. (This may take sev-
eral hours.)
These settings should be about right for
normal household refrigerator usage.
The controls WIII be set about right when milk or
juice is as cold as you like and when Ice cream
is firm.
Do not block the air outlet on the control panel.
Blocking it can slow the air movement needed to
keep temperatures at the level you set.
Changing the control settings.. .
If you need to adjust temperatures in the refrlger-
ator or freezer. use the settings listed In the chart
below.
CONDITION:
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
QUESTIONS?
. ..call your
If Refrigerator
COOL-LINE ’ Section is
service
TOO COLD
assistance
telephone
If ICE Isn’t
number
MADE FAST ENOUGH
, ,r.
If BOTH SECTIONS
wge 13~
l
Adjust the Temperature Control first.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Air Control, if needed.
REASONS:
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough]
Controls not set correctly
for your conditions
RECOMMENDED SETTINGS:
Temperature Control
4
Air Control
3
Temperature Control 3
Air Control
4
Temperature Control
2
Air Control 3
Heavy ice usage
Very cold room temperature
[can’t cycle often enough]
Door opened often
Large amount of food added
Very warm or very cold
room temperatures
Temperature Control 3
Air Control
4
Temoerature Control
3
Air Control 2
are TOO WARM
Yower Saving Control.. .
The Power Saving Control on the Control Con-
sole operates electric heaters around the door
1 Use the “OFF” set-
openings. These heaters help keep moisture from
2 Use the “0N”setting
ting when humidity
if moisture fcfms
forming on the outside of the refrigerator
IS low. on the outslde of the
refrigerator.