Filter
Top Products
Using your refrigerator
POWER SAVING CONTROL
TEMPERATURE CONTROL
AIR OUTLET
AIR CONTROL
Setting the controls...
Controls forthe refrigerator and freezer are in the
refrigerator. When the refrigerator is plugged in for
the first time...
T(g) gc
1. Set the TEMPERA-
2. Set the Air CON-
TURE CONTROL to 3.
TROL to B.
Give the refrigerator time to cool down com-
pletely before adding food. (This may take sev-
eral hours.]
These settings should be about right for nor-
mal household refrigerator usage.
The controls will be set about right when milk or
juice is as cold as you like and when ice cream is
firm.
Do not block the air outlet on the control panel.
Blocking it can slow the air movement needed to
keep temperatures at the level you set.
Changing the control settings...
If you need to adjust temperatures in the re-
l
Adjust the Temperature Control first.
frigerator or freezer, use the settings listed in the
chart below.
l
Wait at least 24 hours between adjustments.
l
Then adjust the Air Control, if needed.
CONDITIONS
If Refrigerator
Section is
TOO WARM
If Freezer
Section is
TOO WARM
r
If Refrigerato
QUESTIONS? Section is
. ..call your
TOO COLD
COOL-LINE”
service
If ICE isn,t
assistance
MADE FAST ENOUGH
telephone
number
If BOTH SECTIONS
DwW.
are TOO WARM
REASONS
Door opened often
Large amount of food added
Room temperature too warm
Door opened often
Large amount of food added
Very cold room temperature
(can’t cycle often enough)
Controls not set correctly
for your conditions
Heavy ice usage
Very cold room temperature
(can’t cycle often enough]
Door opened often
Large amount of food added
Very warm or very cold
room temperatures
Power Saving Control...
The Power Saving Control on the Control Con-
sole operates electric heaters around the door
openings. These heaters help keep moisture from
forming on the outside of the refrigerator.
RECOMMENDED SEllINGS:
Temperature Control
Air Control
:
Temperature Control
4
Air Control
A
Temperature Control
2
Air Control
B
Temperature Control
3
Air Control
A
Temperature Control
4
Air Control
B
1. Use the “OFF” set-
2. Use the “ON” setting
ting when humidity
if moisture forms on
is low.
the outside of the
refrigerator.