Filter
Top Products
Adjusting Crisper Humidity
Control...
You can control the amount of humidity in the
moisture-sealed crisper.
1. The control can be adjusted to any setting be-
tween LO and HI.
2. LO (open] lets moist air out of crisper for best
storage of fruits and vegetables with skins.
3. HI [closed) keeps moist air in the crisper for best
storage of fresh leafy vegetables.
Adjusting the refrigerator shelves...
Shelves can be adjusted to match the way you use
your refrigerator. Glass shelves are strong enough
to hold bottles, milk and other heavy food items.
GLASS SHELVES ARE
HEAVY. BE CAREFUL.
To remove glass shelves:
1. Tilt up at front.
2. Lift up at back.
3. Pull shelf straight out.
To replace glass shelves:
1. Guide the rear hooks into the slots In the shelf
supports.
2. Tilt up front of shelf until hooks drop into slot.
Lower front of shelf to level position.
To remove door shelves:
. Liff up and out.
To replace door shelves:
1. Insert hooks into guides on
2. Push down.
both sides
Removing freezer shelf.. .
1. Lift front slightly.
2. Lift back off supports.
3. Replace in reverse order
Lltt the Front
Then the Back
Removing the
crispers
covers...
To remove the crispers:
1. Slide crisper straight out to stop.
2. Lift the front.
3. Slide the rest of the way out.
4. Replace in reverse order.
To remove the cover:
Covers are held in by two pegs al
two notched tabs in front.
1.
Press front out of way,
2. Lift cover front.
3. Lift back out of pegs.
4. Replace in reverse order
6
the back and
SNAP BACK
INTO PLACE.
If necessary, the center leg can be made shorter or
longer to help level the crisper covers. Turn the leg
clockwise to make it longer. Turn the leg counter-
clockwise to shorten it.