Filter
Top Products
4
Door Removal, Leveling and Alignment
Gather the required tools and parts and read all instructions before starting installation. Save these instructions for future reference.
NOTE: Before moving your product into your home, measure the doorway of your home to see whether you need to remove the
refrigerator and freezer doors. If door removal is necessary, see the instructions below.
IMPORTANT: Before you begin, turn the refrigerator control OFF or turn cooling off. Unplug refrigerator or disconnect power. Remove
food, the ice storage bin (on some models), and any adjustable door or utility bins from doors.
TOOLS NEEDED:
Bubble level; flat-blade screwdriver; ⁵⁄₁₆" wrench; ¹⁄₄", ¹⁄₂", and ⁵⁄₁₆" hex-head socket wrenches
WARNING
Electrical Shock Hazard
Disconnect power before removing doors.
Failure to do so can result in death or electrical shock.
2
Water Dispenser
Tubing Connection
A. Face of Fitting
A
1
Base Grille
3
Wiring Connection
Bottom Hinges
(Left and Right)
7
A. Wiring Plugs
B. Wiring Clip
A CB
C. Grommets
Do Not Remove Screw A
(present on some models)
5
Door Removal
4
Top Left Hinge
A. Do Not Remove Screws.
6
A. Do Not Remove Screws.
Top Right Hinge
Leveling
8
A. Leveling Screw
A
Door Alignment
(Bottom Right Hinge)
9
A. Alignment Screw
Lower
Raise
A
AA
A
A
A
A
A
Lower
Raise