Filter
Top Products
191919191919
When adjusting temperature set points,
use the following chart as a guide:
Cooling On/Off
Your refrigerator and freezer will not cool when cooling is
turned off.
■ To turn cooling off, press and hold the LOCK and MEASURED
FILL buttons at the same time for 3 seconds. The Cooling Off
icon will blink seven times and then remain lit as shown.
IMPORTANT:
■ To avoid unintentionally locking the dispenser or changing
other settings, press both buttons at exactly the same
time.
■ When cooling is off, the dispenser paddles and all controls
except Lock and Measured Fill are disabled.
■ Press and hold LOCK and MEASURED FILL for 3 seconds
again to turn cooling back on.
Options
IMPORTANT: All options are OFF (default) until selected.
■ Press the OPTIONS button to open the Options menu and
select among the Fast Ice, Filter Status and Fast Cool
features.
NOTE: “Fast Cool” and “Fast Ice” illuminate to indicate when
both features are on.
■ Press the ICE/WATER button under “Back” at any time to
return to the Home screen.
Fast Ice
The Fast Ice feature assists with temporary periods of heavy ice
use by increasing ice production. Once selected, Fast Ice will
remain on for 24 hours unless manually turned off.
■ To turn on the Fast Ice feature, press the OPTIONS button to
access the Options menu, and then press TEMP, under Fast
Ice to activate the feature. When the feature is on, the Fast Ice
icon will appear on the dispenser display screen.
■ To manually turn off the Fast Ice feature, press the OPTIONS
button to enter Options mode (unless you are already in
Options mode), then press TEMP, under Fast Ice, again. When
the feature has been turned off, the Fast Ice icon will
disappear from the dispenser display.
Filter Status
Displays the percentage of use remaining in the water filter (from
100% remaining to 0% remaining).
To access Filter Status, press the OPTIONS button to access the
Options menu, then press OPTIONS, under Filter Status, to
display the percent of life remaining in the water filter.
ALSO
The water filter status lights will let you know when to change
your water filter.
■ ORDER FILTER (Yellow) - Order a replacement water filter.
■ REPLACE FILTER (Red) - Replace the water filter. Replacing
the disposable water filter will automatically reset the water
filter status tracking feature. See “Water Filtration System.”
NOTE: REPLACE FILTER will remain illuminated if a filter is
not installed or installed incorrectly.
Fast Cool
The Fast Cool feature assists with periods of high refrigerator
use, full grocery loads, or temporarily warm room temperatures.
Once selected, Fast Cool will remain on for 24 hours unless
manually turned off.
NOTE: If you adjust the refrigerator temperature set point, Fast
Cool will turn off.
■ To turn on the Fast Cool feature, press the OPTIONS button to
access the Options menu, then press TEMP, under Fast Cool
to activate the feature. When the feature is on, the Fast Cool
icon will appear on the dispenser display screen.
■ To manually turn off the Fast Cool feature, press the OPTIONS
button to enter Options mode (unless you are already in
Options mode), then press LOCK, under Fast Cool, again.
When the feature has been turned off, the Fast Cool icon will
disappear from the dispenser display.
CONDITION: TEMPERATURE
ADJUSTMENT:
REFRIGERATOR too cold REFRIGERATOR Setting
1° higher
REFRIGERATOR too warm REFRIGERATOR Setting
1° lower
FREEZER too cold FREEZER Setting 1° higher
FREEZER too warm /
Too little ice
FREEZER Setting 1° lower
Press LOCK and MEASURED FILL at the same time.