Filter
Top Products
Using Your Dishwasher
Before starting dishwasher
1. Read “Important Safety
Instructions” on page 2 before
starting your dishwasher.
2. Properly load the top and bottom
racks, and silverware basket. (See
page 4.)
3. Spin the lower spray arm to make
sure nothing will stop it from
turning freely.
4. Add detergent. See page 5.
5. Check rinse agent dispenser. See
page 5.
6. Push door firmly when closing and
it will automatically latch.
7. Run hot water at sink nearest
dishwasher until it is hot. Turn it
off.
Cycle and options
Spray tower
protector
Filter system screen
(not shown)
Silverware basket
Bottom rack
Water inlet opening
Heating elemen
II/
Lower spray arm
Overfill protector
tergent dispenser
- Access panel
-Door color panel
Model and serial
number label
(on right side)
\
Rinse agent dispenser
Starting dishwasher
1. Select a drying option.
2. Turn the Cycle Control Knob
clockwise to point to WASH. The
dishwasher will automatically start
the cycle.
Option selector button
Cycle control knob
Wash cycle
Dry Select options
A double wash for moderate to heavily
soiled loads
Select the mark next to WASH with the
Cycle Control Knob. The cycle sequence
will be:
Wash p Rmse b Rinse b Wash b Rinse b
Rinse p&me ~Dry Hoff
If the HEATED DRYING Option Selector
If the ENERGY SAVER Option Selector
Button is pushed, air m the dishwasher
Button is pushed, air in the dishwasher
IS heated during the “dry” part of the
is not heated. Using this option helps
cycle.
save energy, but dishes take longer to
For best drying results, use a liquid rinse
dry (overnight) and some water spottmg
agent.
may result. Some items (such as plastics)
may need towel drying.
For best drying results, use a liquid rinse
agent.
Page 3