Whirlpool WU4000 Dishwasher User Manual


 
Using Your Dishwasher
In This Section
Page
Before starting your dlshwasher
...... .
Starting
your dishwasher ................. .6
Adding
a dish during a cycle.. .......... .7
Changlng
a cycle settlng .................. .7
Canceling a cycle
...............................
7
Changlng an option
............................
6
Cycle selection chart
.......................... 8
What happens
In each option.. ......... .8
Page
Uslng delay wash
.............................
10
Using the detergent dispenser.. .....
.I0
Using the rinse agent dispenser.. .
..ll
Quiet operating tips
..........................
12
Water temperature
tips
...................
.13
Energy saving tips
............................
13
Special tips on dishwasher use .....
.14
Operating your dishwasher properly enables you to obtain the best possible results. This
section explains proper dishwasher operation.
Before starting your dishwasher
1. Properly load the top rack, bot-
tom rack, and the silverware bas-
ket. See pages 15-l 7.
4. Check the rinse agent dispen-
ser. See pages 11 and 12.
2. Spin the lower spray arm with
lower rack in place to make sure
nothing prevents arm from turn-
ing freely.
5. Push door firmly when closing
and it will automatically latch.
3. Add detergent. See pages 10
and 11.
6. Run hot water at sink nearest
dishwasher until water is hot.
Turn off water.
Starting your dishwasher
The dishwasher will wash and dry dishware according to the selections you make on the
control panel.
For models with three buttons,
the Heat
On 8Om8 models
on 8Olll8 models
Dry option is automatically selected with the
Pots
a
Pans cycle.
2. For models with three buttons:
If the Pots & Pans cycle will be used, push
POTS CL PANS button.
6