Filter
Top Products
40
TROUBLESHOOTING
TURNTABLE
PROBLEM
The turntable will
not turn.
CAUSE
•
The turntable is not correctly in place. It should be correct-side up and sitting
firmly on the center shaft.
•
The support is not operating correctly. Remove the turntable and restart the
oven. If the support still does not move, call an authorized service technician
for repair. Cooking without the turntable can give you poor results.
CAUSE
•
You have not entered the correct command.
•
You have turned off the tone. See the “Audible signals” section on page 15.
TONES
PROBLEM
You do not hear the
programming or
end-of-cycle tone.
PROBLEM
The display is flashing “:”.
CAUSE
•
There has been a power interruption. Reset the clock. (See the “Setting the
clock” section on page 17.)
DISPLAY MESSAGES
If none of these items are causing your problem, see the “Requesting Assistance or Service” section on page 41.