Filter
Top Products
8
To replace:
1. Carefully lift microwave oven and hang it on the
support tabs at the bottom of the mounting plate.
2. Rotate the front of the microwave oven cabinet
downward. Thread the power supply cord
through the power supply cord hole in the
bottom of the upper cabinet.
3. Rotate the microwave oven towards the cabinet.
Push the microwave oven against the mounting
plate until locking pins snap into the cabinet.
4. Replace the two bolts securing the microwave
oven to the upper
cabinet.
REMOVING AND REPLACING THE MICROWAVE OVEN (CONT.)
wWARNING
Crush Hazard
Attach microwave oven with bolts as shown.
Failure to do so can result in broken bones,
cuts, or other injury.
2 bolts
5. Untape the door and replace the turntable and
support.
6. Replace the vent grille.
7. Replace the two screws in the top of microwave
oven cabinet (the screws located closest to front
corners).
8. If filters were installed, replace them (see “Install-
ing and caring for the filters” in the “Caring for
Your Microwave Oven” section, if needed).
9. Plug in microwave oven or reconnect power.
INSTALLATION INSTRUCTIONS