Filter
Top Products
15
GETTING TO KNOW YOUR MICROWAVE OVEN
To turn the programming tone back on:
TOUCH
and hold for 4 seconds
To disable all audible signals except the
end-of-timer signal:
TOUCH
and hold for 4 seconds
To turn signals back on:
TOUCH
and hold for 4 seconds
NOTE: Two tones will sound when audible signals
are turned on or off.
Interrupting cooking
You can stop the oven during a cycle by opening
the door. The oven stops heating and the fan stops,
but the light stays on. To restart cooking, close the
door and
TOUCH
If you do not want to continue cooking:
•
Close the door and the light goes off.
OR
•
TOUCH
NOTE: Before setting a function, touch OFF/CANCEL
to make sure no other function is on.
CONTROL PANEL FEATURES (CONT.)
21. LIGHT ON/NIGHT/OFF. Touch this pad to turn
the light or night light on or off. See page 18 for
more information.
22. VENT FAN HIGH/LOW/OFF. Touch this pad to
turn on the fan at high or low speed. Also use
it to turn the fan off. See page 17 for more
information.
NOTES:
•
If you have entered all settings for a function but
do not touch START/ENTER in 5 seconds, the
START? indicator light will show.
•
If you open the door while the oven is on and
then shut the door, the START? indicator light
will show. Touch START/ENTER to continue.
•
If you choose a function but do not press
another Command pad within 1 minute, the
display returns to the time of day and you have
to start over.
Audible signals
Your microwave oven comes with audible signals
that can guide you when setting and using
your oven:
•
A programming tone will sound each time
you touch a pad.
•
One long tone signals the end of a Minute
Timer countdown.
•
Four tones signal the end of a
cooking cycle.
•
Two quick, short tones sound once
every minute for the first 15 minutes after an end-
of-cooking signal as a reminder if the food has not
been removed from the oven.
•
Two quick, short tones will sound while
entering and exiting from a hidden feature (for
example, Child Lock) or time of day.
•
Three tones sound if you have
made an incorrect entry.
To disable the programming tone:
TOUCH
and hold for 4 seconds
1
START
ENTER
OFF
CANCEL
2
2
1
continued on next page