Filter
Top Products
Exterior Grill Installation
Exterior grill is required on all installations where the condenser side of the unit is
exposed to the outside of the dwelling (i.e. rain and weather).
The Condenser grill must be removed. Locate the screws at the bottom of the grill and
remove. Using medium force, push the grill upward and lift the grill away from the unit.
Replace the bottom screws and tighten the upper screws. Now determine at what depth
the unit will be installed.
• For a non-flush installation (i.e. holes location #1 WhisperKOOL retrofit or #2
Middle Wall), place the grill on the condenser end and line up the holes on the
grill with the holes on unit location #3. Use the10 screws provided to fasten the
grill to the unit.
• For a flush installation, you will need to place the grill on the condenser side and
then place mounting bracket over the grill sides, “stacking” them. Align the holes
and fasten with the 10 screws provided.
Non-Flush Installation
Flush Installation
22