Filter
Top Products
Thermostat Instructions
Icon Normal Operation
Mutes the audible alarm (buzzer) and deactivates the alarm relay.
Pressing for more than 5 seconds accesses the menu for display in
deg. F or deg. C
Pressing for more than 1 second activates/deactivates the auxiliary
alarm output.
Pressing for more than 5 seconds activates defrost.
Pressing for more than 1 second displays and/or sets the set point.
Changing the set point (desired temperature value)
1) Press the "Set" button for more than 1 second to display the set point. Let go of the
button after the read out begins to flash.
2) Increase or decrease the set point by using the UP or DOWN button until
r
eaching the desired value.
3) Press the "Set" button again to confirm the new value.
Changing Display to read in degrees F. or degrees C
1) Press and hold the "Prg" button for more than 5 seconds; the display will show the
symbol /5
2) Change between deg.F and deg.C by using the UP or DOWN button (deg.C=0,
eg.F=1) d
3) Press the "Set" button again to confirm the new value.
4) Press and hold the “Prg” button for more than 5 seconds to set the computer.
28