Whynter bor325fs Refrigerator User Manual


 
10
CARE AND MAINTENANCE
Cleaning the Outside
Unplug your refrigerator. Clean the outside with a cloth dampened in warm soapy water. Dry
thoroughly with a soft cloth. To clean the door gasket, use only warm soapy water. Never use harsh
cleansers or scouring pads to clean any part of your unit.
Cleaning the Inside
Remove all foods, plus shelves and basket. Wash the shelves and basket in a mild detergent
solution and dry with a soft cloth. Wash inside with plain water and baking soda solution (about two
tablespoons of baking soda to a quart of water). Then rinse and dry. Do not use cleansers such as
soaps, detergents, scouring power or spray cleaners which can cause odors inside the refrigerator.
Changing the Light Bulb
The bulb can be replaced with any standard U-shaped, 2-pin compact fluorescent bulb of 5, 7
or 9 watts. Don’t use any unusual force to remove the old bulb. No tools should be necessary. Follow
steps A through D in the diagram to remove the old bulb. Follow steps E through H to install the new
bulb.
Before proceeding with cleaning and maintenance operations, make sure the power line of the unit is
disconnected and the water line is shut off.