Filter
Top Products
7
Reversing the Door Swing
Tools needed: Flathead screwdriver, Phillips screwdriver
IMPORTANT: Before you begin, unplug the refrigerator or disconnect power.
To remove door from hinges:
1. Remove the top hinge cover and bottom louver.
2. Using a Phillips screwdriver, remove the screws, then remove top hinge mat and top hinge. Keep
the parts together and set them aside.
3. Lift the door off the bottom hinge and set it aside.
4. Using a Phillips screwdriver, remove the magnet and door switch baffle, then place them on the
opposite side at the top of the door.
To replace door on hinges:
1. Using a flat screwdriver, remove the plug buttons from the screw holes opposite the door hinges.
Set aside.
2. Remove the bottom hinge and place it on the opposite side at the bottom of the door.
3. Position the door on the bottom hinge.
4. Align the door on the bottom hinge and replace the top hinge and top hinge mat.
5. Replace top hinge cover and bottom louver.
6. Push the plug buttons into the spare screw holes on the top of the cabinet.