Filter
Top Products
Pulse Brew (Factory set to OFF)Pulse Brew (Factory set to OFF)
Pulse Brew (Factory set to OFF)Pulse Brew (Factory set to OFF)
Pulse Brew (Factory set to OFF)
Press to select,
<<
<<
< or
>>
>>
> to select OFF or one of four pulse patterns (A to D) .
Guidelines for Pulse Brew:
This feature allows tuning of the coffee flavor. This option should only be used with the standard Gray or Purple AFS sprayheads. The pot level should always be set first with this option OFF.
Depending on your grind profile and water conditions, the three Pulse Brew options help “tune” or change the coffee flavor. Filter Pack type coffees typically extract better with the A and B pulse setting.
Decaffeinated coffees typically extract better with the B pulse setting. High-Yield coffees typically extract better with the C pulse setting. Of course, any of the A, B or C settings may be used to suit your taste
profile.
If Pulse Brew is selected (ON), Cold Brew Lock is set to Delta 1 within 5ºF of set point and Cold Brew Lock disappears from the list of program selections.
When Pulse Brew is ON, Pre-infusion disappear from the list of program selections.
Model SelectModel Select
Model SelectModel Select
Model Select
Press to select,
<<
<<
< or
>>
>>
> to select desired model (ALPHA-1, ALPHA-2, ALPHA-3/4/5, Airpot Brewer, Thermo-Alpha) Press to set. The control will reset itself when a new model is selected.
ExitExit
ExitExit
Exit
Press to select, exits program mode and returns unit to operation.
TT
TT
T
ank ank
ank ank
ank
TT
TT
T
emperaempera
emperaempera
empera
ture Checkture Check
ture Checkture Check
ture Check
Turn on brewer at the control panel ON/OFF button. Press and hold
33
33
3 button (see illustration, page 2) for 5 seconds. Water Temperature will be displayed (temperature in heating tank).
18
19
20
21
22
23
24
25
26
27
28
15
16
17
16
3
4
6
7
8
13
14
9
10
11
12
1
2
3
5
5A
5B
Illustrated Parts List – D500GTIllustrated Parts List – D500GT
Illustrated Parts List – D500GTIllustrated Parts List – D500GT
Illustrated Parts List – D500GT
1
2
3
4
5
5A
5B
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
23A
24
25
26
27
28
29
WC-2977
WC-37064
WC-39346
WC-1809
WC-3621
WC-3316
WC-3316-101
WC-5310
WC-5450
WC- 889
WC-2936
WC- 102
WC-6221
WC-3503
WC- 826
WC-8591
WC-3763
WC-3765
WC- 830
WC-6277
WC-5851
WC-5502-01
WC- 917
WC-4394
WC- 522
WC- 523
WC-43055
WC-43062
WC-43058
WC-1438-101
WC-5231
WC-37098
FITTING ASSY, SPRAYHEAD
KIT, LABEL & UCM D500GT CURTIS
LABEL, CNTRL PNL (CURTIS LOGO)
FAUCET, HOT WATER W/JAM NUT
BREWCONE, UNIV7 1/8" BLK PLASTIC
BREW CONE, ASSY S.S. (OPTIONAL)
BREWCONE ASSY, WITH BYPASS (OPTNL)
TUBING, SILICONE, 5/16" I.D. ( 1 FT.)
COVER, TOP
VALVE, DUMP RIGHT 120V
SPRAYHEAD, RED (.131 DIA.)
SWITCH, TOGGLE 125/250 VAC RESISTIVE
GRID, DRIP TRAY AIRPOT
LEG, SCREW BUMPER 3/8-16 STD
VALVE, INLET 1 GPM 120V 10W
CAPACITOR, X2
KIT, VALVE REPAIR USE ON WC-889
KIT, VALVE REPAIR USE ON WC-826
WASHER, FLW ½” 1.0 GPM USE W/WC-826
TANK COMPLETE, D500GT 120V
COVER, TANK W/NOTCHES
PROBE ASSY, WATER LEVEL
HEATING ELMNT 1450W 120V W/NUTS
GUARD, SHOCK HEATING ELEMENT
THERMOSTAT, HI LIMIT HEATER CONTROL
THERMOSTAT, MANUAL RESET
GUARD, SHOCK RESET THERMOSTAT
GASKET, HEATING TANK
PLUG, TANK DRAIN, PP RED
SENSOR, HEATING TANK
COMPOUND, SILICONE 5 OZ TUBE
KIT, BYPASS GEN USE
NN
NN
Nº
Part NPart N
Part NPart N
Part Nº
DescriptionDescription
DescriptionDescription
Description
D
D
29
PARTS DIAGRAMS