Filter
Top Products
5
HEAT SENTRY:
This product is equipped with a
thermostat which may start blower
automatically. To reduce the risk of
injury and to prevent power from
being switched on accidentally,
switch power OFF at service panel
and lock or tag service panel.
Use only with ventilation hood cord
connection kits that have been
investigated and found acceptable
for use with this model hood.
AUTOMATICALLY OPERATED DEVICE.
IMPORTANT NOTE: TO REDUCE THE
RISK OF INJURY, DISCONNECT FROM
POWER SUPPLY BEFORE SERVICING.
THE UNIT IS EQUIPPED WITH AN
INTEGRAL DISCONNECTING SWITCH
LOCATED INSIDE THE BLOWER
HOUSING.
Proper maintenance of the ventila-
tion hood will assure proper
performance of the unit.
Avoid using food products that
produce flames under the ventilation
hood.
Dimensions in parentheses are in
millimeters unless otherwise specified.
INTEGRAL
DISCONNECTING
SWITCH
For general ventilating use only.
Do not use to exhaust hazardous
or explosive material and vapors.
TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK, OR INJURY TO
PERSONS, OBSERVE THE
FOLLOWING:
A)
Installation work and electrical
wiring must be done by qualified
person(s) in accordance with all
applicable codes and standards
including fire-rated construction.
B)
Sufficient air is needed for proper
combustion and exhausting of gases
through the flue (chimney) of fuel
burning equipment to prevent back
drafting. Follow the heating equip-
ment manufacturer’s guideline and
safety standards such as those
published by the National Fire
Protection Association (NFPA), and
the American Society for Heating,
Refrigeration and Air Conditioning
Engineers (ASHRAE), and the local
code authorities.
C)
When cutting or drilling into wall
or ceiling, do not damage electrical
wiring and other hidden utilities.
D)
Ducted fans must always be
vented to the outdoors.
To reduce the risk of fire, use only
metal ductwork.