Filter
Top Products
18
WO LF INDUCTION COOKTOP U S E & C A R E
TIMER O P E R AT I O N
The induction cooktop features a countdown
timer located in the control panel. The timer
may be set to any one-minute increment from
1 to 99. Once set, the remaining time will be
illuminated in the control panel as it counts
down. The timer is available for use in any
mode except
Lock mode
.
To activate the timer,
touch ”
+
” on the
timer control.
Touch and hold ”
+
” or ”
–
” until the desired
time is reached. The timer will start 3
seconds after the last change in value.
When the timer reaches 0, the unit will
sound. The reminder will continue to sound
until is pressed.
Countdown timer
Timer controls
SOUND C O N T ROL
The induction cooktop is equipped with the
ability to change the volume and frequency, or
tone, of the touch controls through the user
option, activated through the timer controls.
To activate the user option,
the cooktop
must be in
Idle mode
.
Touch and hold for 3 seconds to
activate the volume adjustment. The three-
digit display will show ”Uol.”
Touch and hold for 5 seconds to
activate the frequency adjustment. The
three-digit display will show ”FRE.”
Both the volume and frequency are adjusted
using the timer ”
+
” and ”
–
” touch pads. One
touch equals one step up or down in volume
or frequency. The power bar indicator graph of
the rear 1800/3000 W element will show the
current status of the volume or frequency and
change with the user’s input. (1 bar = low, 8
bars = medium and 16 bars = high.)
As the volume/frequency is adjusted, the
cooktop will beep with each change. The beep
will represent the volume/frequency level that
is currently displayed by the power bar graph.
To exit the user option
and return the
cooktop to
Idle mode,
touch .
Or, if no touch pad is touched for 10
seconds, the level is then stored and the
cooktop returns to
Idle mode
.