Wolf ICBDD30 Ventilation Hood User Manual


 
17
TROUBLESHOOTING
IMPORTANT NOTE:
If the downdraft ventila-
tion system does not operate properly, follow
these troubleshooting steps:
Verify that power is being supplied to the
downdraft.
Check electrical connections to ensure that
the installation has been completed
correctly.
Refer to the Troubleshooting Guide in the
Wolf Downdraft Ventilation Use & Care
Information.
If the downdraft still does not work, contact
a Wolf authorized service center. Do not
attempt to repair the downdraft yourself.
Wolf is not responsible for service required
to correct a faulty installation.
IF YOU NEED SERVICE
Maintain the quality built into your down-
draft ventilation system by calling a Wolf
authorized service center.
For service in your area, contact your
Wolf dealer or visit our website,
wolfappliance.com
to find the regional
distributor by country.
When calling for service, you will need the
model and serial number of your down-
draft. This information is found on the
product rating plate, located above the
airbox on the front side of the unit. Refer to
the illustration on page 5.
The information and images in this book are the
copyright property of Wolf Appliance, Inc., an
affiliate of Sub-Zero, Inc. Neither this book nor any
information or images contained herein may be
copied or used in whole or in part without the
express written permission of Wolf Appliance, Inc.,
an affiliate of Sub-Zero, Inc.
©Wolf Appliance, Inc. all rights reserved.
CONTACT
INFORMATION
Website:
wolfappliance.com
INSTALLATION INSTRUCTIONS