Filter
Top Products
Steamer Module Operation 14
TYPE OF WATER
The type of water used in the steamer module will deter-
mine how easy clean up will be. Hard water can leave
calcium deposits in the steamer basin and soft water can
leave salt deposits. Distilled or reverse osmosis water
will leave no deposits in the steamer basin. Refer to care
recommendations on page 16.
Water Level
WATER LEVEL SAFETY FEATURE
If there is no water in the steamer basin and the steamer
module is turned on, the water level safety feature will be
activated. Three chimes will sound, the light in the key
symbol touch pad will ash and the word ‘Lo’ will appear
in the temperature display. Power to the heating element
will be automatically turned off and the module will enter
lock mode.
The water level safety feature will also be activated if
during extended use, water in the steamer basin boils off
to a level that could damage the module.
To reset the water level safety feature:
t Add water to the steamer basin.
t Touch CLEAR to reset the control and begin normal
operation once the unit exits lock mode.
IMPORTANT NOTE: When the water level safety feature
has been activated, the control may take a few minutes to
reset after water has been added.