Installation Considerations 4
Installation Considerations
•
The warming drawer must be installed with a Wolf
stainless steel or integrated drawer front. Make sure
you have the accessory drawer front called for in your
installation. Specific installation instructions are
included with the drawer front.
• For all installations, the warming drawer must be fully
enclosed, top and bottom.
• The warming drawer platform must be able to support
200 lbs
(90 kg). The platform must be a minimum of 1"
(25) above the toe kick to allow for the warming drawer
trim which overlaps
5
/8" (16) on all four sides.
• Check with local utilities for electrical codes that apply
in your area. Local codes vary. Installation, electrical
connections and grounding must comply with applica-
ble codes. In the absence of local codes, the drawer
should be installed in accordance with National Electri-
cal Code ANSI/NFPA 70-1990 or latest edition.
• Model WWD30O is CSA approved for outdoor
installations.
TOOLS AND MATERIALS REQUIRED
• Minimum
3
/4" (19) thick lumber for the solid platform
that supports the warming drawer—must be able to
support 200 lbs
(90 kg).
• Wood screws and hardware to install the platform.
• Lumber for anti-tip block.
• Power saw.
• Level.
• Drill and
1
/1
6
" bit,
1
/2" bit also for integrated drawer
front application.
• Phillips screwdriver.
• 2 wood screws (provided).
• Wood cleats (optional).