Filter
Top Products
7 8
Assembly and Use
of Hand Blender Attachment
1 Ensure the motor base is unplugged. Attach
hand blender rod to motor base by lining up
the two separate parts. Turn clockwise to lock
in place. (see figure 1)
2 Place one of the small metal attachments in the
shaft of the mixing rod. Make sure that the pin
located on the shaft fits into the slot of the
attachment. Press down until attachment locks
in place.
Caution: Blades are sharp. Handle with care.
3 Place food in suitable container for mixing
(beaker, bowl, pan). For best results, solid foods
should be no larger than 1/4" or 1/2" cubes.
4 Plug into 120-volt 60 Hz AC only outlet.
5 Place the hand blender attachment into your
ingredients. Turn the speed selector to LO first.
Press the ON/OFF switch to begin blending; then
gradually increase speed, as needed. (see figure
2) Slowly move the blade up, down and sideways
through the food . Note: Never lift the hand
blender attachment out of your ingredients while
the unit is running.
6 Do not operate the motor continuously for more
than one minute when using hand blender
attachment. Allow it to cool off for 3 minutes
before next use.
7 When you are finished, simply release the
ON/OFF switch, unplug the motor base, and
then unscrew the hand blender rod.
8 To remove blades from the blender rod, use your
blade removal tool as shown in figure 3. Slide
the opening of the tool underneath the blade
and press down.
Using the Attachment Blades
To change the metal attachment blade, remove the attachment already inserted
on the shaft of the mixing rod with the tool provided. Use the side of the tool with
the semi-circular slot to remove the attachment. Place the slot around the shaft,
underneath the attachment, and lift up to remove.
Caution: Blades are sharp. Handle with care.
Suggested Uses
To change the metal attachment blade, remove the attachment already inserted
on the shaft of the mixing rod with the tool provided. Use the side of the tool with
the semi-circular slot to remove the attachment. Place the slot around the shaft,
underneath the attachment, and lift up to remove.
Caution: Blades are sharp. Handle with care.
Attachment Functions Speed
Aerator disc Minimum
Blending disc Medium to
Maximum
Grinding blade Maximum
Multipurpose blade Medium to
Maximum
Beat cream, whip egg whites,
puddings, sauces, frostings and other
airy, foamy mixtures. When using, move
blending rod up and down to draw air
in. Use a tall, narrow container for best
results when foaming milk, making
cream and whipping egg whites.
Mix and stir shakes, drinks, omelet
batters, sauces and emulsions. Use for
pancake batter, gravies and dressings.
Cut, chop, and crush raw or cooked
meat and hard vege-tables.Grind
cooked meat for use in recipes such as
casseroles or chicken salad.
Chop, crush, and mash vege-tables, and
fruit for baby food, soups and sauces.
Use to crush ice (add water to cubes
before crushing.)
figure 1
figure 2
figure 3