Filter
Top Products
Helpful Hints
• The hand blender can be used in hot liquids. Always use care when using in
hot liquids. To avoid splashing when using the hand blender in a saucepan,
insert the hand blender into the pan first, and then press the ON/OFF switch
for operation.
• To puree foods, a certain amount of liquid is needed. Add cooking liquid,
broth, juice, milk, or cream, until desired consistency is reached.
• For thorough blending, move blade up and down in mixture until smooth.
• You will achieve better mixing results if you use deep, tall containers.
• For easy cleanup, unplug blender and rinse under running water immediately
after using.
• Place liquid ingredients into the beaker first unless recipe specifically states
otherwise.
• Before turning the appliance on, immerse the hand blender attachment into the
prepared ingredients, thus ensuring they will not spill over.
• For greater efficiency, move the appliance in small outward spiraling circles
while mixing, without touching the bottom of the beaker with the hand
blender attachment.
• The hand blender attachment cannot blend hard or fibrous ingredients unless
they are in less than 1/2" pieces, soft ones into 1/2 - 1" pieces.
• Some foods require a small amount of liquid to allow them to move freely
around the blades. Soft or wetter foods require less liquid, while dry ingre-
dients require more liquid. Add the liquid a little at a time until the mix gains
the required consistency.
• When using the hand blender, ensure the blades are covered to avoid splashing.
9 10
Assembly and Use
of Food Chopper Attachment
1 Ensure the motor base is unplugged.
2 Assemble chopper bowl by first placing the
chopping blade onto the blade shaft in the
chopper bowl. (see figure 1) Then place food in
bowl. For best results, solid foods should be no
larger than 1/4" or 1/2" cubes.
3 Secure the bowl cover firmly onto the bowl by
turning clockwise. (see figure 2)
4 Attach motor base to top of bowl cover by
turning clockwise.
5 Plug into 120-volt 60 Hz AC only outlet.
6 Attach the motor base to the chopping bowl
cover (see figure 3). Hold the motor base with
one hand and the bowl with the other. Set speed
control to MAX. Press the ON/OFF switch to
begin chopping. Use a pulse action when
chopping by pressing and releasing ON/OFF
switch.
7 Do not operate the motor continuously for more
than 15 seconds when using chopper
attachment. Allow it to cool off for 3 minutes
before next use.
8 When you are finished, simply release the
ON/OFF switch, unplug the motor base, and
then unscrew the chopper bowl.
figure 1
figure 2
figure 3