Filter
Top Products
The control panel and programmes
- 6 -
123 6 5 4
1 On/Off-button
Press the button in order to start the required
programme.
2 Temperature selector
55° - Button in
65° - Button out
3 Extra drying effect
If the button is pressed in the temperature of the
final rinse water will be higher and the drying effect
will be improved.
4 Programme selector
Turn the programme selector clockwise to the
programme required and press in the On/Off button.
During the water heating process, the timer is
standing still. To isolate the dishwasher from the
mains completely, unplug it from the wall socket.
5 Indicator lamp
While the programme is in progress, the operating
lamp is lit and it goes out when the programme is ready.
6 Salt indicator lamp
The operating lamp indicates when the salt needs to be
replenished. The lamp may remain lit for one or more
programmes after replenishment, which is fully normal.
Door lock
Press the handle down and open the door. Avoid opening
the door while the machine is running. If the door is opened
and is put standing ajar after a completed programme the
dishes will dry faster.
Programmes
Rinse & Hold is used if you want to wait until you have
a full load. This cycle rinses the load and keeps it moist,
making the main wash easier later on.
No detergent should be used. It does not matter which
temperature you select.
Intensive for loads which have heavily dried-on food
remnants and for those which are heavily soiled.
Normal for normal soiled loads. Replaces the pre wash
with one rinse without heating.
Economy is used for lightly soiled loads which do not
need any rinse off, such as cups, saucers and glasses.