Filter
Top Products
25
Electrical connection
This appliance must be earthed.
The manufacturer declines any
responsibility should this safety measure
not be observed.
If the plug that is fitted to your appliance is not
suitable for the socket, it must be cut off and the
appropriate plug fitted.
Important
The wires on the mains lead are coloured in
accordance with the following code:
Green and Yellow -Earth
Blue -Neutral
Brown -Live
If you fit your own plug, the colours of the wires in
the mains lead of your appliance may not
correspond with the markings identifying the
terminals in your plug.
Proceed as follows:
1. Connect the Green and Yellow (earth) wire to the
terminal in the plug which is marked with the
letter "E" or the earth symbol or coloured
green and yellow.
2. Connect the Blue (neutral) wire to the terminal in
the plug which is marked with the letter "N" or
coloured black.
3. Connect the Brown (live) wire to the terminal in
the plug which is marked with the letter "L" or
coloured red.
The plug moulded onto the lead incorporates a
13amp BSI362 fuse. Only ASTA or BSI fuses should
be used.
The plug must not be used if the fuse cover/carrier is
lost. The cover/carrier is indicated by the coloured
insert at the base of the product.
A replacement cover/carrier must be obtained from
your local Service Force Centre.
This appliance complies with the following E.E.C. Directives:
- 73/23 or 19.2.73 (Low Voltage Directive) and subsequent modifications;
- 89/336 or 3.5.89 (Electromagnetic Compatibility Directive) and subsequent modifications.
CE03