US47
11
The cutlery basket
Long bladed knives stored in an upright
position are a potential hazard.
These items should only be placed in the
removable knife basket.
Take care when loading or unloading
sharp items such as knives.
Removable knife basket
Long and/or sharp items of cutlery such as carving
knives must be placed horizontally in the
removable knife basket provided, to be positioned
at the rear of the upper basket.
Cutlery should be placed in the removable cutlery
basket with the handles facing downwards. If the
handles protrude from the bottom of the basket,
obstructing the lower spray arm, load the cutlery
with the handles facing upwards.
Mix spoons with other cutlery to prevent them from
sticking together.
The cutlery basket is in two parts which can be
separated to give greater loading flexibility. To
separate the two parts, slide them horizontally in
opposite directions and pull them apart. To
reassemble, reverse the procedure.
For best results we recommend you to use the
cutlery grids provided (if the size and dimensions of
the cutlery allow it).
The upper basket
The upper basket is designed for plates (dessert
plates, saucers, dinner plates of up to 25 cm in
diameter), salad bowls, cups and glasses.
Arrange items on and underneath the cup racks so
that water can reach all surfaces.
Glasses with long stems can be placed upside down
in the raised cup racks.
Light items (plastic bowls etc.) should be loaded in
the upper basket and arranged so they do not move.
Before closing the door, ensure that the
spray arms can rotate freely.
UI62
UI63
UI53