Filter
Top Products
17
Door reversibility
1. Unplug the appliance from the power supply
before carrying out the below-mentioned
operations.
2. Remove the ventilation grill (D).
3. Unscrew the bottom hinge (E).
4. Remove the door by releasing it from the top
hinge pin (A).
5. Remove the pin and the washer (A+B) from the
top hinge (C), then mount these on the opposite
side, after having removed the plugs which must
be refitted on the other side.
6. Refit the door.
7. Screw down the bottom hinge (E) on the opposite
side by using the screws previously removed.
8. Remove the plug (F) from the ventilation grill (D)
and replace it on the opposite side.
9. Re-assemble the ventilation grill (D).
10.Unscrew the handle. Refit it on the opposite side.
Important
After completion of the door reversing operation,
check that the door gasket adheres to the cabinet. If
the ambient temperature is cold (i.e. in Winter), the
gasket may not fit perfectly to the cabinet. In that
case, wait for the natural fitting of the gasket or
accelerate this process by heating up the part
involved with a normal hairdrier on a low setting.
E
F
D
F
F
F
C
B
A
D736
D737