Filter
Top Products
18
Inner door reversal
Using a screwdriver release bracket (1) by pressing
on the internal spring and withdraw it from its seat
together with the door;
1. remove plug (2) and fit it in the hole left open on
the opposite side;
2. turn the door through 180¡, remove the bracket
(1) and refit it on the opposite side.
3. Refit the door and insert the top pin and bottom
bracket (1), pushing it into place.
4. To ensure correct storage of food, the door is
fitted with a simple spring device which holds it in
the open position until it is properly closed.
PR140
1
2
180°