Filter
Top Products
Indicators Description
End indicator.
Salt indicator. This indicator is off while the programme operates.
Programmes
Programme
1)
Degree of soil
Type of load
Programme phases Duration
(min)
Energy
(kWh)
Water
(l)
Heavy soil
Crockery, cutlery,
pots and pans
Prewash
Wash 70 °C
Rinses
Dry
85-95 1,8-2,0 22-25
Normal soil
Crockery and cutlery
Prewash
Wash 65 °C
Rinses
Dry
100-110 1,4-1,6 19-21
2)
Fresh soil
Crockery and cutlery
Wash 65 °C
Rinse
30 0,9 9
3)
Normal soil
Crockery and cutlery
Prewash
Wash 50 °C
Rinses
Dry
130-140 1,0-1,2 14-16
4)
All Prewash 12 0,1 5
1) The water pressure and temperature, the variations of the mains supply, the options and the quantity of dishes can change the
programme duration and the consumption values.
2) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
3) This is the standard programme for test institutes. With this programme you have the most efficient use of water and energy
consumption for crockery and cutlery with normal soil. Refer to the supplied leaflet for test information.
4) Use this programme to quickly rinse the dishes. This prevents the remaining food to bond on the dishes and bad odours to come out
from the appliance.
Do not use detergent with this programme.
Options
Acoustic signals
The acoustic signals operate in these conditions:
• When the programme is completed.
• A malfunction occurs to the appliance.
Factory setting: on.
You can deactivate the acoustic signals.
Deactivating the acoustic signals
1. Press the on/off button to activate the appliance.
2. Make sure that the appliance is in setting mode. Refer
to ‘SETTING AND STARTING A PROGRAMME’.
3. Press and hold the programme button until the pro-
gramme indicator (A
A
) flashes and the programme in-
dicator (B
B
) comes on.
4. Press immediately the programme button.
• The programme indicator (A
A
) comes on with a
fixed light.
• The programme indicator (B
B
) starts to flash.
16