Filter
Top Products
23
5. After some time, the door lock will be activated and
the related symbol will be displayed (Fig. 28).
At this time control is no more active.
At the end of the pyrolitic cleaning process, the display
shows the time of day. The oven door is locked.
Once the oven has cooled down, an acoustic signal will
be emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time, touch
control .
NOTE: The time indication includes the cooling down
time.
If you select a cooking function while the pyrolytic
function is active, the cleaning cycle will be inter-
rupted.
If the oven door lock is activated, it is impossible
to select any cooking function until the door lock
is off.
To programme the pyrolytic
cleaning cycle (delayed start,
automatic stop)
If you desire, you can programme the starting and end-
ing time of the pyrolytic cleaning cycle.
1. Touch control to switch on the oven.
2. Touch control as often as necessary, until the
“Pyro“ function symbol (PYRO 1-level 1) ap-
pears flashing in the display.
3. Touch controls ' ' or ' ' to select the pyrolytic 1
(PYRO 1) or pyrolytic 2 (PYRO 2) function.
4. Once you have chosen the desired pyrolytic func-
tion, “the “Pyro” writing will flash in the display wait-
ing for confirmation to start the pyrolytic cleaning func-
tion.
At this time, touch the time function control
until The "End of Cooking" symbol and the
arrow symbol will flash (Fig. 29). The control
panel will display the end of the cleaning cycle (that
is, the actual time + cooking duration time).
5. Touch controls ' ' or ' ' to select the required end of
cycle time. Then, the “Pyro” writing starts flashing,
the oven lamp switches off and the pyrolytic cleaning
cycle will start at the set time.
6. After some time, the door lock will be activated and
the related symbol will be displayed.
At the end of the pyrolitic cleaning process, the display
shows the time of day. The oven door is locked.
Once the oven has cooled down, an acoustic signal will
be emitted and the door will unlock.
To stop the pyrolytic cleaning cycle at any time, touch
control .
Fig. 28
Fig. 29