Filter
Top Products
9
1
2
3
4
5
6
7
8
9
Cooking Functions
FAN COOKING - This setting allows you to
roast or roast and bake simultaneously using
any shelf, without flavour transference. Pre-set
temperature: 175°C.
CONVENTIONAL COOKING - The heat comes
from both the top and bottom element, ensuring
even heating inside the oven. Pre-set
temperature: 200°C.
DOUBLE GRILL - The full grill element will be
on. Recommended for large quantities. Pre-
set temperature: 250°C.
GRILL - It can be used for grilling small
quantities. Pre-set temperature: 250°C.
THERMAL GRILLING - This function offers an
alternative method of cooking food items,
normally associated with conventional grilling.
The grill element and the oven fan operate
together, circulating hot air around the food.
Pre-set temperature: 180°C.
Select a maximum temperature of 200°C.
PIZZA - The bottom element provides direct
heat to the base of pizzas, quiches or pies,
while the fan ensures air is circulated to cook
the pizza toppings or pie fillings.
Pre-set temperature: 175°C.
BOTTOM - The heat comes from the bottom of
the oven only, to allow you to finish your dishes.
Pre-set temperature: 250°C.
TOP - The heat comes from the top of the oven
only, to allow to you finish your dishes. Pre-set
temperature: 250°C.
DEFROST
– The oven fan operates without
heat and circulates the air, at room temperature,
inside the oven. This function is particularly
suitable for defrosting delicate food which could
be damaged by heat, e.g. cream filled gateaux,
iced cakes, pastries, bread and other yeast
products.
PYROLYTIC CLEANING - This function allows
you to clean thoroughly the oven cavity.
The following list displays in sequence all the available
cooking functions.
Programming the Oven
How to set the minute minder
1. Touch the "Time Function" control . The symbol
flashes near the "Minute Minder" symbol and
the time display shows "0.00" (Fig. 10).
2. Symbol will flash for 5 seconds. Within this time,
touch control “ “ to select the required time (Fig. 11).
Maximum time is 23 hours 59 minutes. After another
5 seconds after you have set the time, the symbol
stops flashing. This means that the setting has been
stored in the Electronic Control memory and that the
countdown started.
3. When the programmed time has elapsed, you hear
an acoustic alarm while symbol flashes and the
time display shows "0.00".
4. To switch off the acoustic alarm, touch any control.
The oven will NOT switch off if in use.
The Minute Minder function can also be used
when the oven is off.
To change the Minute Minder setting
Touch the "Time Function" control : the symbol
flashes near the "Minute Minder" symbol . It is now
possible to change the Minute Minder setting by touching
control “ “ or “ “ (Fig.11).
To cancel the Minute Minder:
Touch time function control : the symbol flashes
near the "Minute Minder" symbol . Then touch control
“ “ until the time display shows "0.00".
10
Fig. 10
Fig. 11