Filter
Top Products
4
Fitting the Splash back
(only in model ZCM 610 X)
A stainless steel splash back is supplied with the
appliance. This is meant to be fitted on the rear edge of
the cooker's hob. The splash back package is in the
oven cavity.
1. Unpack the splash back and dispose of the packaging
with due regard to safety and the environment.
2. Slide the two bayonets of the splash back into the
relevant supports on the rear edge of the cooker's
hob.
S
T
O
P
SET
TIME
Description of the Cooker
Splash back
(only in model ZCM
610 X)
Semi-Rapid burner
Rapid burner
Control panel
Shelf
Oven door
Semi-rapid burner
Auxiliary burner