Zanussi ZCM 600 Cooktop User Manual


 
9
2. The timer
IMPORTANT
The timer can be used to time a set cooking period. At
the end of the cook time the timer will automatically switch
off the oven if in use.
The timer gives an audible reminder at the end of any
period of cooking up to 23 hours and 59 minutes.
To set, press button (1) and the display will read 0.00, see
Fig. 6.
Release button (1) and press and hold button (2). The
display will count up in one minute intervals until the
interval to be timed is reached, e.g. 30 minutes, see Fig.
7. If necessary, press and hold button (1) to achieve the
correct time interval.
The timer will begin to count down once set. At the end
of the timed period, the timer will click, switching the
oven OFF if in use.
An audible signal will sound for up to 2 minutes.
The cookpot symbol will flash and the time of day will
show in the display. See Fig. 8.
To stop the sound press button (1). The display will stop
flashing and show the time of day, e.g. 15.00. The cookpot
symbol ( ) will go out. See Fig. 9. If using the oven it
will come on again once button (1) has been depressed.
When cooking is complete remove food and turn OFF
oven temperature control.
3. To cancel the timer
Press and release button (1). Then press and hold button
(1) and the display will count down in one minute intervals
to 0.00. See Fig. 10. Release button (1).
After a few seconds the cookpot symbol will flash and the
time of day will show in the display. See Fig. 11
If the oven is in use this will switch OFF after a few
seconds.
To reset, press button (1) and (2) together. See Fig. 12.
4. Things to note
1. The time of day must be set before the oven will ope-
rate. There will be a few seconds delay before the
oven switches on.
2. The timer function controls the main oven only and
will switch the oven OFF at the end of a timed period.
This function is useful if you want to begin cooking
now and have the oven switch OFF automatically.
3. If you have used the timer to time food cooking in the
oven you will need to reset the timer before the oven
can operate again.
Fig. 8
Fig. 7
Fig. 9
Fig. 6
STOP
SET
TIME
PUSH
BOTH
-
+
STOP
SET
TIME
PUSH
BOTH
-
+
STOP
SET
TIME
PUSH
BOTH
-+
STOP
SET
TIME
PUSH
BOTH
-
+
STOP
SET
TIME
PUSH
BOTH
-
+
STOP
SET
TIME
PUSH
BOTH
-
+
STOP
SET
TIME
PUSH
BOTH
-
+
Fig. 12
Fig. 11
Fig. 10