Filter
Top Products
8
Setting the timer
The timer can be used to time a set cooking period. At
the end of the cook time the timer will automatically switch
off the oven if in use.
The timer gives an audible signal at the end of any period
of cooking up to 23 hours and 59 minutes.
To set the timer:
1. Press button : the display will read 0.00 and the
cookpot symbol ( ) will come on in the display (See
Fig. 3).
2. Release button , then press and hold button .
The AUTO symbol will come on in the display.
The display will count up in one minute intervals until
the interval to be timed is reached, e.g. 30 minutes
(See Fig. 4). The timer will begin to count down once
set and the display will revert to the time of day.
3. At the end of the timed period, the oven will be
switched off automatically and an acoustic alarm will
be heard. The cookpot symbol ( ) will go out, and
the AUTO symbol will flash in the display (See fig. 5).
To switch off the acoustic alarm, press button .
Then press button once again: the AUTO symbol
will go out.
NOTE: remember to turn the oven function and
the thermostat control knob to zero when cooking
is over.
To reset the timer:
1. Press button , then proceed as described above.
To cancel the timer:
1. Press and release button . Then press and hold
button : the display will count down in one minute
intervals to 0.00. The AUTO symbol will go out.
2. Release button . After a few seconds the display
will revert to the time of day and the cookpot symbol
( ) will go out.
If the oven is in use, it will switch OFF after a few
seconds. To reset, proceed as described in the
previous paragraphs.
Things to note
1. The time of day must be set before the oven will ope-
rate. There will be a few seconds delay before the
oven switches on.
2. The timer function controls the oven only and will
switch the oven OFF at the end of a timed period.
This function is useful if you want to begin cooking
immediately and have the oven switch OFF
automatically.
3. If you have used the timer to time food cooking in the
oven you will need to reset the timer before the oven
can operate again.
Fig. 4
Fig. 3
Fig. 5
STOP
SET
TIME
PUSH
BOTH
STOP
SET
TIME
PUSH
BOTH
A
U
T
O
STOP
SET
TIME
PUSH
BOTH
A
U
T
O