Filter
Top Products
2
1
B
60 mm
50 mm
A
Electrical installation
Warning! Only a qualified and competent person
must do the electrical installation.
The manufacturer is not responsible if you do not
follow safety precautions from the chapter "Safety
information".
This appliance is supplied without a main plug or a main
cable.
Covering terminal board
The recommended cross-section area is six square milli-
metres (6 mm²).
When you refit the mains terminal cover, make sure that
the lower tabs are located inside the bottom edge of the
aperture, before you fix the two screws into the top edge of
the mains terminal cover.
Make sure that the cover is securely fastened.
To open the cover of terminal board obey the proce-
dure in opposite sequence.
Terminal board
Make sure that the links are fitted as shown.
NNN
LL
Do not remove blanking plates.
Environment concerns
The symbol on the product or on its packaging
indicates that this product may not be treated as
household waste. Instead it should be taken to the
appropriate collection point for the recycling of electrical
and electronic equipment. By ensuring this product is
disposed of correctly, you will help prevent potential
negative consequences for the environment and human
health, which could otherwise be caused by inappropriate
waste handling of this product. For more detailed
information about recycling of this product, please contact
your local council, your household waste disposal service
or the shop where you purchased the product.
Warning! Refer to "Safety information" chapter.
Packaging material
The packaging material is environmentally-friendly
and recyclable. Plastic parts are marked with international
abbreviations such as PE, PS, etc. Dispose of the packag-
ing material in the containers provided for this purpose at
your local waste management facility.
19