Filter
Top Products
27
Fixing to the adjacent units
Insert the two fixing brackets into the slots provided in
the top front part of the dishwasher as shown in the
figure.
Secure the brackets to the adjacent units with the
3.5 x 16 screws using the upper or the side holes.
Attention!
The sides of the dishwasher must never be
drilled to prevent damage to hydraulic
components.
The appliance must be secured to the
underside of the worktop using the brackets
provided.
Failure to do this could cause damage or
injury.
Noise protection
Adhesive noise protection ensures excellent noise
insulation. This should be fitted when the dishwasher
has been mounted in the recess and the height
adjusted.
Apply the protection as shown in the drawing, making
sure that the non-adhesive section reaches right down
to the floor.
INS03en
II54
II61