Zanussi ZDF 866 Oven User Manual


 
22
If something goes wrong
SYMPTOM
The oven does not come on
The oven temperature light does not come on
The oven light does not come on
It takes too long to finish the dishes, or they are
cooked too fast.
Steam and condensation settle on the food and the
oven cavity.
The timer does not work
The oven fan is noisy
SOLUTION
Check the oven is in manual operation and that
both a cooking function and temperature have been
selected.
Check the oven is wired in properly, and the
socket switch or the switch from the mains supply to
the oven are ON.
Select a temperature with the thermostat control
knob
Select a function with the oven function control
knob.
Select a function with the oven function control
knob
Check the light bulb, and replace it if necessary
(see "Replacing the oven light")
The temperature may need adjusting
Refer to the contents of this booklet, especially to
the chapter “Using the Oven”.
Leave dishes inside the oven no longer than 15-20
minutes after the cooking is completed. See page 10
Check the instructions for the timer.
Check the grease filter is correctly fitted.
Check that shelves and bakeware are not vibrating
in contact with the oven back panel.
If after all these checks, the oven still does not work,
contact your local Zanussi Service Force Centre.
When you contact them, they will need the following
information:
1. Your name, address and post code.
2. Your telephone number
3. Clear and concise details of the fault
4. The model and the serial number (which can be
found on the rating plate)
5. Date of purchase
If the oven is not working correctly, please carry out the following checks, before contacting your local Zanussi
Service Centre.
Please note that it will be necessary to provide proof
of purchase for any in-guarantee service calls.
In-guarantee customers should ensure that the
above checks have been made as the engineer will
make a charge if the fault is not a mechanical or
electrical breakdown.