7
24 hour Clock and Timer
The electronic timer can be used to programme the
main oven only.
The electronic timer can indicate the time of day and
automatically operate the oven.
Before the oven can be operated, the time of day must
be set on the electronic timer.
In case of loss of power, all the settings (time of day,
set program or program in operation), will be
cancelled. When the power is restored, the numbers
on the display will flash, and the timer has to be reset.
Please note that this is a 24 hour clock. For example,
2pm is shown as 14:00.
- +
- +
☞
TO SET THE TIME OF DAY
Press buttons and , and at the same time turn
the time setting knob until the correct time of day is
displayed.
☞
TO SET THE MINUTE MINDER
Press button and at the same time turn the setting
time knob until the duration time is displayed
(maximum 23 hours, 59 minutes).
Our diagram shows the timer set for 35 minutes.
After a few seconds the time of day will show in the
display.
To check the number of minutes remaining, press the
button. At the end of the timed period an alarm
will sound. To switch off the alarm press button
.
- +
A
U
T
O
A
U
T
O
Minute minder
Cooking duration
End of cooking time
Manual function
Cookpot symbol - This will be displayed when
a program is in operation.
Auto symbol - This will be displayed when the
oven has been programmed for automatic
operation.
- + Time setting knob
A
U
T
O
Time
setting
Cookpot
symbol
Auto
symbol
Programming
controls