Zanussi ZDI 600 QX Dishwasher User Manual


 
gramme: prewash - main wash - rinses -
drying.
2. In this row several details are displayed:
Setting mode guide to the selection of
the washing programme - duration time
of the programme, options (when
together with the washing programme
one or more options are set, the update
of the programme duration will occur
automatically).
Once the programme has started in-
dicates the sequence of the running
phase and the running time of the pro-
gramme in progress.
3.
Symbols: indicate the options (see chart).
The symbols have the following meaning:
DELAY START:
fixed in setting mode; flashing when countdown in progress
EXTRA RINSE:
illuminated when this option is active.
MULTITAB:
illuminated when the Multitab function is active.
ECO DRY:
illuminated when this option is active.
SOUND VOLUME:
exclusion of the volume for audible signals.
Select and start a washing programme
1. Check that the baskets have been loaded
correctly and that the spray arms are free
to rotate.
2. Check that the water tap is opened.
3.
Press the On/Off button.
4. Select the washing programme. ( See
"Washing programmes chart" ).
5. If required, postpone the start time of the
washing programme.
6. Set, if required, the options.
7.
Press the OK button and close the door,
the washing programme will start
automatically.
If the delay start has been set, the count-
down will start automatically. Once the de-
lay start has elapsed the programme will
start automatically.
The opening of the door will interrupt the
countdown. Close the door; the countdown
will continue from the point at which it was
interrupted.
WARNING!
Interrupt or cancel a washing programme in
progress ONLY if it's absolutely necessary.
Attention! Hot steam may escape when the
door is opened. Open the door carefully.
7