In addition to the dishwashing programme se-
lection, the following functions can also be set
with the help of these buttons:
• the setting of the water softener,
• deactivation/activation of the audible sig-
nals.
• cancel a washing programme or a delay start
in progress
• activation/deactivation of the rinse aid
dispenser when the Multi-tab function is ac-
tive
IMPORTANT!
Setting mode
Always remember that when:
– setting the water softener,
– deactivation/activation of the audible sig-
nals,
– activating/deactivating the rinse aid
dispenser,
the appliance MUST be in setting mode:
• Press On/Off button, All programme light are
illuminated = the appliance is in setting
mode.
• Press On/Off button, ONLY a programme
button is illuminated = last performed or se-
lected programme still set.
In this case, to return to setting mode, the
programme has to be cancelled.
To cancel a set programme or a programme in
progress; simultaneously press function but-
tonsB and C, until ALL programme button lights
are illuminated. The programme has been can-
celled and the machine is now in setting mode.
Indicator lights
Salt Illuminates when the special salt has run out.
Is never illuminated while a washing programme is
running.
Rinse aid Illuminates when the rinse aid has run out.
Is never illuminated while a washing programme is
running.
End of programme Illuminates when the washing programme has ended.
It also has added functions of visual signalling as:
– the setting of the water softener,
– deactivation/activation of the audible signals,
– intervention of an alarm due to the malfunction of
the machine.
5