Filter
Top Products
In this fully integrated appliance the controls are located on
the top of the door. When selecting a programme, the door
needs to be open.
1. On/Off push button
2. Salt refilling indicator light
3. On/Off indicator light
4. Programme selection push buttons
5. End of cycle indicator light
Audible signals
Audible signals have been introduced to help indicate which
operations the dishwasher is performing.
Short "instruction accepted" signal
When any of the push buttons are pressed (except the
On/Off push button), a short audible signal informs you that
the machine has accepted the instruction given.
Long "programme run" signal
A continuous audible signal, heard only when you close the
door, informs you that the washing programme is starting.
Intermittent "end of programme" signal
An intermittent audible signal informs you that the wash
programme has ended.
To deactivate the audible signals, press simultaneously and
keep pressed both NORMAL 65°c and BIO 50°c push
buttons, during the pressure of the push buttons an
intermittent audible signal will be heard for about 3 seconds,
after this time the audible signal will turn off, this means that
the audible signals have been deactivated.
To reactivate the audible signals, press simultaneously and
keep pressed both NORMAL 65°c and BIO 50°c push
buttons, during the pressure of the push buttons no signal will
be heard for about 3 seconds, after this time an intermittent
audible signal will start, this means that the audible signals
have been reactivated.
Both operations (to deactivate or reactivate the audible
signals) must be carried out before starting a washing
programme; the setting will remain memorised after
switching off the dishwasher.
4
The control panel
SO234