Filter
Top Products
16
Levelling the Appliance
When placing the appliance ensure that it stands level.
This can be achieved by adjusting either or both of the
feet (1) at the front of the appliance. If required the
washers (2), that are accessories of the feet, can be
removed.
Do not stand the appliance next to a source of heat
such as a radiator or cooker.
The plastic bag of accessories also contains two
spacers to be fitted into special holes in the back
of the appliance. Fit the spacers into the holes,
taking care to ensure that the arrow (A) is
positioned as shown in Figure. Then turn them
through 45° (arrow (A) vertical) until they lock
into place.
Ventilation Requirements
The appliance must have adequate ventilation to
ensure correct operation.
Diagram shows the ventilation requirements when
installed:
A Under a cupboard.
B When freestanding
PR60
A
45°