Zanussi ZFC 321 WB Freezer User Manual


 
Problem Possible cause Solution
Large quantities of food to be frozen
were put in at the same time
Wait some hours and then check the
temperature again. Next time insert
smaller quantities of food to be frozen at
any one time.
Food placed in the appliance was too
warm
Allow food to cool to room temperature
before storing.
Products to be frozen are placed too
closely to each other
Place the products in a way so that cold
air could circulate among them
The lid has been opened often Try to not open the lid often
The lid has been opened for a long
time.
Do not leave the lid open longer than
necessary
It is too cold inside the freezer The temperature is not set correctly. Set a warmer temperature
The appliance does not work at
all. Neither cooling nor lighting
works
Plug is not connected to the mains
socket properly
Connect the mains plug properly
Power does not reach the appliance Try connecting another electrical device
to the power outlet
The appliance is not switched on Switch on the appliance
The thermostatic control is not on Check setting of thermostatic control
There is no voltage in the mains socket
(try to connect another appliance into
it)
Call an electrician
Customer Service
If your appliance is still not working properly after making
the above checks, contact the nearest service centre.
To obtain fast service, it is essential that when you apply
for it you specify the model and serial number of your
appliance which can be found either on the guarantee
certificate or on the rating plate located on the external
right side of the appliance.
Technical data
Volume (gross) Litre 213 Height mm 868 Rising Time hours 28
Volume (net) Litre 210 Width mm 795 Energy Consumption kWh/24h 0,781
Rated Power Watt 80 Depth mm 665 Freezing Capacity kg/24h 14
Voltage Volts 230 Weight Kg 39 Climatic Class SN-T
Further technical information are situated in the rating plate on the external right side of the appliance.
8