Zanussi ZKT 622 HN Cooktop User Manual


 
9
Cooking zone selection
D To activate a cooking zone keep the correspon-
ding control touched for about onesecond. A zero
with digital point comes on in the correspon-
ding cooking zone display.
Setting selection --
D For selecting or changing the setting for the coo-
king zone from to .
use the touch control to increase the setting.
use the touch control to reduce the setting.
Cooking zone switch--off
D 1. Select the desired cooking zone by means of
the cooking zone touch control.
D 2. For switching off pushthe and touchcon-
trols at the same time or return to zero with the
touch control.
Residual heat indicator
After switching off a single cooking zone or the entire
hob any residual heat is indicated by (“hot”)showing
in the display of the corresponding cooking zone.
Even after switching off a cooking zone the residual
heat indicator will go out only after sufficient cooling
down of the cooking zone.
The residual heat can be used for the melting and
keeping dishes warm.
Caution! While the is illuminated the hob is hot
and there is a risk of burning.
Caution! If there is a power failure the will go
out even if there is residual heat in the hob. Care
will have to be taken until there is no longer a risk
of burning.