Filter
Top Products
14
AUTO PROGRAMMES OPERATION
The AUTO PROGRAMMES function automatically
works out the correct cooking mode and cooking time.
You can choose from 7 AUTO COOK menus and 5
AUTO DEFROST menus. What you need to know
when using this automatic function:
1. Press the AUTO PROGRAMMES button once, the
display will appear as shown.
The menu can be chosen by pressing the AUTO
PROGRAMMES button until the desired menu
number is displayed. See pages 15 - 17 “AUTO
PROGRAMMES charts”.
To select a defrost menu, press the AUTO
PROGRAMMES button at least 8 times. If you press
the button 8 times, will appear in the display.
The menu will be changed automatically by holding
down the AUTO PROGRAMMES button.
2. The weight or quantity of the food can be input by
rotating the TIMER/WEIGHT knob until the desired
weight is displayed.
• Enter the weight of the food only. Do not include the
weight of the container.
• For food weighing more or less than weights given in
the automatic chart, use manual programmes. For
best results, follow the cooking charts on pages 19 -
21.
3. To start cooking press START/+30 button.
When action is required (e.g. to turn food over), the
oven stops and the audible signals sound, remaining
cooking time and any indicator will flash on the
display. To continue cooking, press the START/+30
button.
START/+30 button
TIMER/WEIGHT knob
AUTO PROGRAMMES button
Menu number
1.
x1
2.
3.
The final temperature will vary according to the
initial food temperature. Check food is piping hot
after cooking. If necessary, you can extend the
cooking time and change the power level.
Example:
To cook gratin weighing 1,0 kg using AUTO COOK AC-7.
2. Enter the weight by rotating
the TIMER/WEIGHT knob
clockwise.
x7
x1
3. Press the START/+30
button.
1. Select the menu required by
pressing the AUTO
PROGRAMMES button
seven times.
Check the display.
1. ZD-21+22D-EU English 01/06/2004 08:42 Page 14