Filter
Top Products
27
A
C
C
Fig. 3
After cleaning, place the inner glass back in its
original position by inserting it in the rubber distance
holders C.
The inner pane B (with side decors)
must be arranged with the decorated
surface to the inner side of the door.
The slight roughness of the printing
must not be discernible when you
stroke your fingers over the visible
surface.
After placing the inner glass back:
Figure 3. Insert the perforated plate A back in its
original position and check that everything is
securely fastened and firm.
DO NOT clean the oven door while
the glass panels are warm. If this
precaution is not observed the glass
panel may shatter.
If the door glass panel becomes
chipped or has deep scratches, the
glass will be weakened and must be
replaced to prevent the possibility of
the panel shattering. Contact your
local Service Force Centre who will
be pleased to advise further.
The side swing door reversal must
be carried out by qualified installers
only or by an authorized Electrolux
After Sales technician. Do not
attempt to reverse the Side Swing
Door yourself.