Filter
Top Products
28
“Cooking duration” and “End of cooking
time” combined
The functions “Cooking duration” and “End of cooking
time” can be used simultaneously to set the oven to switch
on and off automatically at a later time.
1. With the “Cooking duration” function (carry out the
cooking duration setting as described in the relevant
chapter) set the duration time. Then, press button
:
the display will show the programmed setting.
2. With the “End of cooking time” function (carry out
the End of cooking setting as described in the relevant
chapter) set the end of cooking time.
The relevant pilot lamps will come on and the display
will show the time of day. The oven will switch on
and off according to the set programmes.
“Minute minder” function
The minute minder alarm will sound at the end of a
timed period, but the oven will remain on, if it is in use.
To set the minute minder:
1. Press button
repeatedly to select the “Minute
minder” function. The relevant pilot lamp
will start
flashing.
2. Then, press button “
” or “ ” (maximum: 2 hours,
30 minutes).
3. After the setting is carried out, wait for 5 seconds: the
“Minute minder” pilot lamp
will come on.
4. At the end of the timed period, the pilot lamp will start
flashing and an acoustic alarm will be heard. To
switch off the acoustic alarm, press any button.
To cancel the minute minder:
1. Press button repeatedly to select the “Minute
minder” function. The relevant pilot lamp
will flash
and the display will show the remaining time.
2. Press button “
” until the display shows “0:00”.
After 5 seconds the pilot lamp will go out and the
display will revert to the time of day.
How to switch off the display
1. Press two programmer push buttons simoultaneously
and keep them pressed for about 5 seconds. The
display will switch off.
2. To switch on the display, press any button.
The display can be switched off only if no other
functions have been set.
To cancel the end of cooking time:
1. Press button
repeatedly to select the “End of
cooking” function. The relevant pilot lamp
will
flash and the display will show the programmed
End of cooking time.
2. Press button “
” until the display shows the
current time of day. The programmer will beep and
the pilot lamp will go out.