Filter
Top Products
17
CLEANING THE OVEN
Fig. 9
Electric bulb: 15W, 220-240 V, 50 Hz, 300°C, E14.
These bulbs are available from your local Zanussi
Service Centre whose address can be found in tho
Zanussi Customer Care Booklet.
Replacing Components
Prior to undertaking any maintenance work or
replacing the oven light, be sure to disconnect
appliance from the electricity supply.
Replacing The Oven Light
Push in and turn the glass lid anticlockwise (Fig. 9).
Remove the faulty bulb and replace with one which is
heat resistant to 300°C.
Before cleaning always allow the cooling
fan to cool the oven down before
switching off at the electricity supply
Cleaning materials
Before using any cleaning materials on your oven,
check that they are suitable and that their use is
recommended by the manufacturer.
Cleaners that contain bleach should NOT be used as
they may dull the surface finishes. Harsh abrasives
should also be avoided.
Glass Panel
This should be cleaned with a soft cloth soaked in
warm soapy water. Do not use abrasive scourers or
steel wool.
Oven Shelves and shelf supports
To clean the oven shelves, and shelf supports soak
in warm soapy water and remove stubborn marks
with a well wetted soap impregnated pad. Rinse well
and dry with a soft cloth.
The shelf supports can be removed for easy cleaning
(see Fig. 8). Please ensure the retaining nuts are
secure when refitting the shelf supports.
Oven Cavity
The enamelled oven cavity is best cleaned whilst the
oven is still warm. It is advisable to wipe the oven
over with a soft cloth soaked in warm soapy water
after each use. However, from time to time it will be
necessary to do a more thorough cleaning, using a
proprietary oven cleaner.
Fig. 8
1
2
FO 0287
FO 0435