Filter
Top Products
3. Press and hold function buttons B and C until
the indicator lights of function buttons A, B
and C start to flash.
4. Release function buttons B and C.
5. Press function button A.
– The indicator lights for function buttons B
and C go off.
– The indicator light for function button A
continues to flash.
– The digital display shows the current level.
Example: digital display shows
= level 3.
6. Press the function button A one time to in-
crease the water softener level by one step.
7. Press the on/off button to save the opera-
tion.
Use of dishwasher salt
Caution! Only use dishwashers salt. Types
of salt that are not applicable for
dishwashers cause damage to the water softener.
1
2
3
Fill the salt container
with 1 litre of water
(only the first opera-
tion).
4
5
6
It is normal that water overflows from the
salt container when you fill it with salt.
Make sure that there is no grain of salt outer
of the salt compartment. Salt which stays on
the tank for a while drills the tank. It is recom-
mended to start a washing programme immedi-
ately after you fill the salt container. This pre-
vents of corrosion because of spilled salt.
When you set electronically the water softener
to level 1, the salt indicator light does not stay on.
Use of rinse aid
Caution! Only use branded rinse aid for
dishwashers.
Do these steps to fill the rinse aid dispenser:
7