Filter
Top Products
Combination buttons ”A”:
In addition to selecting a programme, you can by
pressing these two buttons adjust the setting of the
water softener and cancel a programme in progress.
Indicator lamps:
Shows current phase of the selected programme.
• Wash cycle in progress top lamp
• Drying in progress middle lamp
• Programme cycle lowest lamp
ended
The display can show:
• Which hardness level the water softener is
adjusted to.
• Which start time is set.
• Remaining time of a programme in progress.
• An error code.
Control lamps:
Shows that
• Refilling of salt container is necessary
• Refilling of the rinse aid dispenser
is necessary
The control panel
- 6 -
Programme
buttons
Water softener
button
On/Off button
Delay start
button
Display
Indicator and
control lamps
A
How to set the delayed start
The programme start can be delayed between 1 and 19
hours.
1. Press in the On/Off button.
2. Press the delay start button repeatedly, until the
required delay shows on the display. Indicator
lamp for the delay start button is lit.
3. Press the button for the required programme.
4. The remaining time to the start is shown in the
display. After the set delayed start time has
elapsed, the programme starts.
Changing the delayed start:
If the programme has not started, you are still able
to change the set time with the delay start button.
Cancelling the delayed start:
If the programme has not started, the delayed start
can be cancelled. Press the delay start button
repeatedly, until the running time of the selected
programme appears on the display. The required
programme starts immediately.