Filter
Top Products
www.zephyronline.com
Installation - Internal Blower
The following instructions are for installing the internal blower.
CAUTION: To reduce the risk of re and electric shock, install this range-
hood only with internal blower models MT-020 provided with the kit cod
CBI-600A.
For external and in-line blower prepa-
ration please turn to page 18.
1.Remove the 6” round metal knockout
plate from the blower plate by using
a at head screwdriver. See.Fig.1
2. Remove the (6) screws securing the
blower plate to the blower housing
and remove blower plate. See. Fig.2
3. Place the 6" metallic ange on the
blower's air outlet Fig.3A.(the ange
may already be pre-installed). Install
internal blower into blower plate and
secure using (4) screws included with
the blower. See Fig.3B
4. Secure capacitor box connected to
the provided cable to the blower
plate using (2 type B) screws inclu-
ded with the blower. See.Fig.4
5. Secure Green/Yellow ground wire
connected to the cable to the provi-
ded capacitor to blower plate.Fig.5
(type A)
- 16 -